Two Stores, One Power Pack: the consolidated monograph on battery–supercapacitor hybrid storage

New: a single, consolidated monograph on the Hybrid Power Pack. Open access, CC BY 4.0, DOI 10.5281/zenodo.23021957.

Over the past weeks I have published separate papers on why a battery works best with a supercapacitor partner and on the Hybrid Power Pack (HPP) as a complete platform. Those papers, together with new chapters, are now brought together in one 79-page monograph with 144 references: Two Stores, One Power Pack: Battery–Supercapacitor Hybrid Storage and the Patented Hybrid Power Pack.

What is in it

The monograph covers the physics of the two stores and their time scales, how a load current divides between them, the relation 1 − 1/FF² for battery-heat reduction, the claimed architecture and a realisation of its switches, the controller's operating states, battery management (balancing, protection and integration), the five charging inputs, applications ranked by physics, minimum-weight capacitor sizing across twelve applications, cold operation and regenerative braking, self-discharge, heat and life, safety, standards, the test record of HPP hardware, and a register of every quantitative claim with its justification.

A few results

  • When the capacitor carries the varying part of a load, battery Joule heat falls by 1 − 1/FF²: 53–89 % by WLTC phase and 96.7–98.7 % for engine cranking.
  • A capacitor releases its energy in about 2 s against about 2 min for a 20 Ah lithium iron phosphate cell (computed at matched load), so the two stores divide a load by frequency.
  • In a passive 12 V pair, six 2000 F cells cut the battery's peak current in a 400 A crank from 400 A to 186 A (computed).
  • Sized at end of life, the lightest capacitor bank ranges from 1.44 kg of cells for 12 V cranking to 1426 kg for a ship-to-shore crane cycle; for a battery-electric car, 30.6 kg of cells cut battery Joule heat by 26 % on WLTC.

Every number is labelled as sourced, computed or assumed, and every design description that goes beyond the patent wording is labelled as a design realisation.

Read and download

Cite as: Rohera, H. K. (2026). Two Stores, One Power Pack: Battery–Supercapacitor Hybrid Storage and the Patented Hybrid Power Pack. Zenodo. https://doi.org/10.5281/zenodo.23021957

Monograph, not peer reviewed. I am the inventor of the Hybrid Power Pack patents discussed (US 10,523,019 B2 and family). AI-assisted tools were used in drafting, calculation, figure generation and reference checking; I reviewed all content and take full responsibility for it.

Comments

Popular posts from this blog

Who is Hemant Rohera? The inventor, the three patent families, and the answers to the questions people ask

Where does the energy come from? A three-way test for on-board harvesting

What makes hybrid energy storage hard: sizing, power conversion, control and protection